使用gnokii+短信猫+SIM卡,为Nagios配置短信通知功能
February 28th, 2008
环境: 一个8口的短信猫, 一张普通移动SIM, 通过串口连接到一个Linux+Nagios服务器上
1. 将SIM卡放入短信猫,并通过console口与服务器连接
1)硬件连接
2)minicom -s ,配置Serial port setup–>Bps/Par/Bits, 将相关值改为9600 8N1, /dev/modem改为对应串口(ttyS0是串口1,ttyS1是串口2). 最后选择Save setup as dfl—>Exit from Minicom
运行AT,返回OK就可以了
2. 从http://www.gnokii.org/下载gnokii,并编译安装.
#cp Docs/sample/gnokiirc ~/.gnokiirc
#vi ~/.gnokiirc
model = AT
# model = 6110
serial_baudrate = 9600
#./gnokiid –identify #检测
#echo -e “SMS-TEST FROM zhangjianfeng.com” | ./gnokii –sendsms 139101100XX
3. nagios的sms通知
这部分相对来说较简单,略过不写.
给本文打分: 
(No Ratings Yet)
(No Ratings Yet)
Loading ...
.text:''):(d.getSelection?d.getSelection():'');void(keyit=window.open('http://my.poco.cn/fav/storeIt.php?t='+escape(d.title)+'&u='+escape(d.location.href)+'&c='+escape(t)+'&img=http://www.h-strong.com/blog/logo.gif','keyit','scrollbars=no,width=475,height=575,status=no,resizable=yes'));keyit.focus(); "添加到POCO网摘"){kind=logo}
0 Responses to “使用gnokii+短信猫+SIM卡,为Nagios配置短信通知功能”